Monitoring of injected energy generated by an on-grid photovoltaic system via blynk virtual plataform with esp32
International Journal of Development Research
Monitoring of injected energy generated by an on-grid photovoltaic system via blynk virtual plataform with esp32
Received 20th September, 2022; Received in revised form 27th September, 2022; Accepted 08th October, 2022; Published online 30th November, 2022
Copyright©2022, Otacilio José de Macedo Nunes et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
This Photovoltaic solar energy is obtained by converting solar radiation into electrical energy, and it has stood out among the most significant sources of sustainable energy. Thus is used in Photovoltaic Systems Connected to the Grid, allowing consumers who generate their electrical energy to reduce their bills through the energy injected into the electrical Grid. It uses a bidirectional electrical energy meter to calculate the energy flow. The development of an embedded system to estimate and measure the injected and consumed energies and the generated credit stands out here. The system is integrated with Internet of Things devices, with current and voltage sensors connected to the Esp32 microcontroller board that sends data to the Blynk platform, allowing energy monitoring. This system successfully estimated energy and made the information available on the Blink platform, allowing the monitoring of credit estimates with a positive or negative balance.
